1900 kVA Diesel Generator Set - E MH ST 1900/6/38 | EMSA Generator
  • BAUDOUIN
  • CUMMINS
  • PERKINS
  • VOLVO
  • MITSUBISHI
  • FPT - IVECO
  • YANGDONG
  • SDEC

1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60hz 3phase Diesel Generator Set - E MH ST 1900/6/38

E MH ST 1900/6/38
MITSUBISHI Series
Diesel Generator Sets
STANDBY
kVA
1900
kW
1520
PRIME
kVA
1727
kW
1382

 

1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Water Cooled
Water Cooled
60 hz
60 hz
Easy maintenance
Easy maintenance
Modular type sound-proof canopy
Modular type sound-proof canopy
3 phase
3 phase
Diesel
Diesel
Warning system for decreasing fuel with electronic fuel level sender
Warning system for decreasing fuel with electronic fuel level sender
Remote control system
Remote control system

Emergency Standby Power: Emergency standby power, provided by diesel generators, acts as a backup during power outages. These generators kick in swiftly during emergencies, ensuring continuity for critical operations. Ideal for homes, businesses, and industries, their usage duration should be limited to prevent wear. Strict standards like NFPA 110 ensure their reliability.

Prime Rated Power: Prime rated power generators serve as primary power sources, especially in remote locations. These diesel generators handle varying loads over extended periods, making them perfect for sites without grid access. Commonly mobile, they're crucial for mining, construction, and energy industries, offering consistent, prime-rated power supply.

Continuous Operation Power: Continuous operation generators offer non-stop, stable power output, especially where grid access is inconsistent or expensive. These generators operate at a consistent 100% load, making them indispensable for remote mining, military, or farming sites. Unlike prime-rated generators, they don’t vary in power, ensuring unwavering power delivery.

 

QUALITY STANDARDS

Our generator sets are manufactured in accordance with VDE 0530, BSE 4999, BS5000, IEC 34, TS ISO 8528, TS EN ISO 3744, TS EN ISO 3746, TS EN 60034-1, TS EN 60204-1, TS EN 60335-1, TS EN 61439-1, EN 61000 and TS EN ISO 12100 standards. We hold ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 27001:2022, ISO 27701:2019 and ISO 10002:2018 management system certifications. Our generator sets with power up to 400 kW are manufactured in accordance with the European noise emission directive 2000/14/EC and are certified by Ente Certificazione Macchine. We hold a CE declaration. Our production, in accordance with TS ISO 8528-4 and TS ISO 8528-5 / 13 standards, is certified by TSE. Our anti-corrosion protection certificate, in accordance with the TS EN ISO 9227 standard, is issued by METALTEK, accredited by TÜRKAK.
Engine Specifications

Engine Specifications

  • MITSUBISHI series heavy duty diesel engine
  • 4 CYCLE, WATER COOLING SYSTEM, TURBOCHARGED - INTERCOOLER INDUCTION
  • Electronic governor system
  • 12/24 volt self-starter and charger alternator
  • Changeable air, fuel and oil filter
  • Flexible fuel pipe

 

  • Oil discharge valve and extention pipe
  • Industrial type silencer, exhaust spiral or compensator
  • Maintenance free battery
  • Engine block water heater
  • Diesel gen-set maintenance and operating instructions and electrical circuit diagram
MODEL
S12R-PTAA2
POWER
STANDBY kW
1633
PRIME kW
1484
SPEED (rpm)
1800
CYCLE
4
DISPLACEMENT (lt)
49.03
NUMBER OF CYLINDERS
12 V
BORE AND STROKE
170 x 180
COMPRESSION RATIO
13,5 : 1

 

GOVERNOR TYPE
Electronic
INDUCTION
TURBOCHARGED - INTERCOOLER
COMBUSTION SYSTEM
DIRECT
COOLING SYSTEM
WATER
FUEL CONSUMPTION (lt/h)
100% OF PRIME POWER
-
75% OF PRIME POWER
-
50% OF PRIME POWER
-
TOTAL LUBRICATION SYSTEM CAPACITY (lt)
180
TOTAL COOLANT CAPACITY (lt)
368
Alternator Specifications

Alternator Specifications

  • Brushless, single bearing, flexible disc 4 poles alternator for harmonic failure
  • H type isolation class
  • IP 23 protection class
  • Self exciter

 

  • Electronic automatic voltage regulator
  • Stator 2/3 step for harmonic failure
  • The alternator windings are protected by insulating varnish against oil and acid
BRAND
STAMFORD
MODEL
S7L1D-F
FREQUENCY (HZ)
60
POWER (KVA)
2035
DESIGN
4 pole, brushless
CONNECTION TYPE
VOLTAGE (V)
380

 

phase
3
A.V.R.
VOLTAGE REGULATION (+/-)
INSULATION SYSTEM
PROTECTION
IP23
RATED POWER FACTOR
WEIGHT COMP. ALTERNATOR (KG)
Genset Controllers

Genset Controllers

Datakom Smart 500-mk2

Datakom SMART 500-MK2

The SMART 500-MK2 is a cost effective genset controller ready for BMS integration and internet monitoring

 

OPTIONAL GENSET CONTROLLERS OPTIONAL

Datakom SMART 200

Datakom 200

Datakom D500

Datakom D500

Datakom D500-GSM

Datakom D500-GSM

DEEPSEA 6120

DEEPSEA 6120

DEEPSEA 7320

DEEPSEA 7320

ComAp AMF25

ComAp AMF25

 

 
Datakom SMART 200
Datakom SMART 500-MK2
Datakom D500
Datakom D500 GSM
DEEPSEA 6120
DEEPSEA 7320
ComAp AMF25
AUTOMATIC MAINS MONITORING
✔
✔
✔
✔
✔
✔
✔
MANUEL START
✔
✔
✔
✔
✔
✔
✔
REMOTE START
✔
✔
✔
✔
✔
✔
✔
REMOTE MONITORING WITH SIM CARD
OPTIONAL
OPTIONAL
OPTIONAL
✔
✖
OPTIONAL
OPTIONAL
1 ADITIONAL OPTION (HORN, OIL-FUEL HEATER ETC.)
✖
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
LIGHT WARNING AND MIMIC DIAGRAM
✔
✔
✔
✔
✔
✔
✔
BATTERY CHARGER
✔
✔
✔
✔
✔
✔
✔
RS-485 COMMUNICATION
OPTIONAL
OPTIONAL
✔
✔
✖
✔
OPTIONAL
ETHERNET (TCP-IP) COMMUNICATION
✖
✔
✔
✔
✖
OPTIONAL
OPTIONAL
E MH ST 1900/6/38

Container

  • Chassis parts and load-bearing construction are manufactured from 140mm NPU
  • The base metal sheet is manufactured from 2/3 diamond-shaped metal sheet
  • Sidewall metal sheets are manufactured from 1.5mm ST 37 DKP trapezoidal metal sheet
  • The top metal sheet will be manufactured from 1.5mm ST 37 DKP trapezoidal metal sheet
  • Air disposing and suction parts are manufactured with the normal shutter in bolt-mounted hot-plug
  • Lifting lugs are manufactured to bear the total load of the container (with generator)(8 pcs ISO Locked)
  • PPG RAL 9010 paint application is followed for painting

 

  • Internal illumination has 2x1x18 Watt waterproof fixture and 1x1x16 A monophasic plug fitting
  • Top wall isolation is 0.8mm galvanised perforated metal sheet coating on 8cm fibro-glass glass wool plate
  • The double-winged main door is manufactured with a pipe-type locking mechanism
  • Service doors are manufactured with 4 single-winged and internal panic bar mechanisms to be locked outside (These doors are designed mounted inside the container body and doorknobs do not exceed container body
  • Emergency stop button on long edges
  • Warning signs are placed to necessary places inside and outside the container

 
E MH ST 1900/6/38
 
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Dimensions
(W x L x H) mm
xx
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Weight (Kg)
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Fuel tank capacity (lt)
3000
 
E MH ST 1900/6/38
 
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Dimensions
(W x L x H) mm
2220x5000x2953
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Weight (Kg)
11671
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
Fuel tank capacity (lt)
3000
1900 kVA MITSUBISHI S12R-PTAA2, STAMFORD S7L1D-F, 60 hz
External type

SILENCER OPTIONS

  • Standard industrial type
  • Critical type
  • Hospital type

 

CONTAINER OPTIONS

  • Standard container
  • Acoustic container

GEN-SET SAFETY PROTECTION & ALARMS

  • High water temperature
  • Low oil pressure
  • High & low engine speed
  • Low radiator water level

 

  • Over current load
  • High & low genset voltage
  • Start/stop failure

OPTIONAL EQUIPMENTS

  • Charge ammeter
  • Moulded case circuit braker (in automatic models)
  • Hospital/Critical type silencer
  • Modular type sound-proof canopy
  • Mobile - trailer
  • Synchronization control panel for 2-16 gensets

 

  • 3 pole/4 pole automatic transfer panel (A.T.S.)
  • Fuel and oil heater
  • Alternator heater
  • Automatic fuel filling system
  • Fuel-water seperator filter
  • PMG warning system